A fall in the toilet｜Unnoticed for hours
The risk is building
Real-time Fall Detection
Falls reported instantly — no waiting to be found
Radar or wearable sensors monitor toilets, corridors and elderly residents’ rooms. Staff are notified the moment a fall or prolonged inactivity is detected — with no cameras, so privacy is protected.
Powered by SenseOS｜Engineering-grade deployment with 3,000+ devices connected locally
Published Updated
At a glance
What is SenseOS fall detection?
SenseOS fall detection uses radar or wearable sensors to monitor activity in toilets, corridors and elderly residents’ rooms 24/7. When a fall or prolonged inactivity is detected, staff or family are alerted instantly via SMS, WhatsApp, email or voice call, and every event and response time is recorded for care reviews and safety audits. Radar sensing uses no cameras, protecting privacy, and a typical room is installed in minutes.
Key facts
- Monitoring
- Falls and prolonged inactivity detected 24/7
- Privacy
- Radar sensing, no images captured
- Battery
- About 2 years, with low-battery reminders
- Installation
- Wall or ceiling mount, no cabling or renovation
- Data
- Stored in the cloud, Excel/PDF export and API integration
Who it is for
- Elderly care homes and nursing centres
- Elderly living alone
- Toilets and bathrooms
- Corridors and public areas
How it works
- 1On-site assessment, sensor mounted on wall or ceiling
- 2Activity monitored 24/7
- 3Instant alert on a fall or prolonged inactivity
- 4Events and response times logged and exportable
Have you experienced these situations?
Every minute after a fall matters, yet falls are often found only when someone happens to pass by.
Elderly living alone｜Unable to call for help
The risk is building
Short-staffed｜Limited room rounds
The risk is building
The later a fall is found, the harder the injury is to treat.
How it works — four steps
From the sensor in the room to the platform log, every fall is visible and traceable.
01
Install｜On-site assessment, sensor mounted on wall or ceiling
A typical room takes just minutes, with no cabling or renovation.
02
Monitor｜Activity monitored 24/7
Radar tracks movement and posture changes, with live room status on the platform.
03
Alert｜Instant notification on a fall or prolonged inactivity
Notify staff or family via SMS, WhatsApp, email or voice call.
04
Report｜Events and response times recorded
Every alert, acknowledgement and clearance is time-stamped for care reviews.
Every room, on one platform
Web and mobile views stay in sync with room status, alert history and response times. Reports support care reviews and safety audits. Add more monitoring applications to SenseOS later without building another system.
Web + mobile app, always in sync
Where does it fit?
Elderly care homesNursing centresElderly living aloneToilets / bathroomsCorridors and public areas
Customer example
Elderly care home rooms and toilets｜25 sensors · 24-month service
Fall discovery time cut from tens of minutes to instant
Every alert is logged so staff can follow up immediately
Frequently asked questions
A typical room takes just minutes. Sensors mount on the wall or ceiling with no cabling or renovation.
Around two years in normal use. The platform and app remind you when battery levels are low, so sensors never fail silently.
No. Radar sensing captures no images; it only detects movement and posture changes.
Historical data is stored in the cloud and can be exported as Excel or PDF reports.
Set multiple recipients and schedules to notify staff or family via SMS, WhatsApp, email or voice call.
Yes. API integration with existing property management or monitoring platforms is supported, or it can run independently.
Based on the number of sensors and service period, including installation, platform use and support, quoted after a site assessment.
Local support is available during office hours, with free replacement during the hardware warranty.
Other solutions
Extend the same SenseOS platform to more building management scenarios.
